Prepare your skin: Begin by ensuring your face is cleansed and adequately moisturised. Next, proceed with applying your preferred foundation base from our selection.

Choose the right brush: Select our specifically designed Saint Minerals® Detail Highlighter Brush for highlighter application. This type of brush will help you achieve a precise + controlled application.

Swirl the brush: Gently swirl your brush over the surface of the pressed highlighter, picking up a small amount of product. Tap off any excess by lightly tapping the brush on the back of your hand or the edge of the compact.

Apply to high points: Focus on the areas of your face that naturally catch the light. This includes the tops of your cheekbones, the bridge of your nose, the brow bone, the cupid’s bow (the curve of your upper lip), + the inner corners of your eyes.

Lightly sweep + blend: Using gentle, sweeping motions, apply the highlighter to these high points of your face. Blend the product into your skin using soft, circular motions to create a seamless + natural-looking glow.

Build if desired: If you want a more intense glow, repeat steps 3 to 5, gradually building up the highlighter until you achieve your desired level of luminosity.

Check for any touch-ups: Take a step back and assess your overall complexion.

Mica (CI 77019), Boron Nitride, Zinc Stearate, Ethyl Macadamiate, Octyldodecyl Stearoyl Stearate, Jojoba Esters, Lauroyl Lysine, Rice Powder, Tocopherol (Natural Vitamin E), Zinc Oxide, Phenoxyethanol (and) Caprylyl Glycol (and) Sorbic Acid.

May contain +/- Red Iron Oxide (CI 77491), Yellow Iron Oxide (CI 77492), Black Iron Oxide (CI 77499) & Tin Oxide

*May contain traces of nut*

Prepare your skin: Begin by ensuring your face is cleansed and adequately moisturised. Next, proceed with applying your preferred foundation base from our selection.

Choose the right brush: Select our Saint Minerals® Angled Contour Brush, specifically designed for bronzer application. This type of brush will help you achieve a seamless + natural-looking result.

Swirl the brush: Gently swirl your brush over the surface of the pressed bronzer, picking up a small amount of product. Tap off any excess by lightly tapping the brush on the back of your hand or the edge of the compact.

Define your features: Start by applying the bronzer to areas where the sun naturally hits your face, such as the forehead, temples, cheekbones, + jawline. Use light, sweeping motions to blend the bronzer into your skin, creating a soft + natural-looking warmth.

Contour if desired: For more defined features, apply the bronzer along the hollows of your cheeks, under the jawline, + along the sides of the nose. This technique adds depth + dimension to your face, enhancing your bone structure.

Apply as a blush or eyeshadow: To use the bronzer as a blush, gently sweep it over the apples of your cheeks. For an eyeshadow, apply the bronzer to your eyelids, focusing on the crease area for added definition.

Blend + build: Take a moment to blend the bronzer thoroughly into your skin, ensuring there are no harsh lines or uneven patches. If you desire a more intense look, repeat steps 3 to 6, gradually building up the colour until you achieve your desired level of warmth and definition.

Check for any touch-ups: Take a step back + assess your overall complexion.

Mica (CI 77019), Titanium Dioxide, Zinc Stearate, Rice Powder, Boron Nitride, Yellow Iron Oxide (CI 77492), Red Iron Oxide (CI 77491), Zinc Oxide, Ethyl Macadamiate, Octyldodecyl Stearoyl Stearate, Jojoba Esters, Tocopherol (Natural Vitamin E), Black Iron Oxide (CI 77499), Lauroyl Lysine, Phenoxyethanol (and) Caprylyl Glycol (and) Sorbic Acid

*May contain traces of nut*

Applying Base Makeup:

Start with your desired base makeup, whether it’s a Saint Minerals foundation, + BB cream,

Take the Detailed Highlighter Brush + swirl it onto the product to pick up the desired amount.

Begin buffing the product onto your skin using circular motions, focusing on areas that need coverage or where you want to create a soft, luminous finish.

Continue buffing until the product is seamlessly blended into your skin, providing a natural-looking + radiant complexion.

Creating a Liquid Highlighter:

If you have the Saint Minerals® Natural Oil Primer, mix a few drops with the foundation or base product on the back of your hand.

Use the Detailed Highlighter Brush to blend the mixture together until you achieve a smooth consistency.

Apply the liquid highlighter to your cheeks, brows, + temples, using gentle tapping motions or light sweeping strokes.

This will create a subtle, luminous effect + add a touch of radiance to your complexion.

Highlighting and Strobing with the Saint Minerals® All-Over Bronzer:

To highlight + strobe, take a small amount of the All-Over Bronzer on the Detailed Highlighter Brush.

Apply it to the high points of your face, such as the cheekbones, brow bone, + down the bridge of the nose.

Use light, feathery strokes to blend the bronzer into your skin, creating a contoured + filter-free finish.

This technique will add dimension + a healthy glow to your face.

Eye Makeup:

For eye makeup, use the Detailed Highlighter Brush to dot a small amount of product onto the inner corner of your eyes.

This will help lift tired eyes, create a brighter + more awake look, or add a contrasting touch to a smokey eye.

Gently blend the product with your fingertips or a small brush for a seamless application.

Enhancing the Cupid’s Bow:

To create a subtle strobe effect on your cupid’s bow, take a small amount of product on the Detailed Highlighter Brush.

Pop it above your cupid’s bow, which is the curved area above your upper lip.

This technique will add a touch of luminosity to your lips + create a defined and enhanced cupid’s bow.

Mica, Titanium Dioxide + Iron Oxide CI 77491.

Preparing the Skin:

Start with a clean + moisturised face. Ensure your skin is free from any residue or excess oil. Next, proceed with applying your preferred foundation base from our selection.

Applying the Bronzer:

Take the Dual Finish Blush Brush and swirl it into the All-Over Bronzer powder.

Tap off any excess product to avoid applying too much at once.

Begin applying the bronzer to the areas where the sun naturally hits your face, such as the forehead, cheeks, + bridge of the nose.

Use light, sweeping motions to blend the bronzer into your skin, ensuring a natural + seamless finish.

For a more defined + contoured look, apply the bronzer to the hollows of your cheeks, along the jawline, and on the temples.

Build up the intensity gradually by adding more product if desired.

Enhancing the Eyes:

To add a subtle, copper hue to your eyelids, use an eyeshadow brush to gently apply the Saint Minerals® All-Over Bronzer.

Start at the centre of the eyelid + blend the colour outwards, focusing on the crease for added depth.

For a more intense look, layer the bronzer + blend until you achieve the desired effect.

Creating a Contoured Photo-Finish:

Pair the All-Over Bronzer with the Saint Minerals® All-Over Mineral Highlighter to create a beautifully contoured look.

Apply the bronzer to the areas you want to define + sculpt, such as the hollows of the cheeks, the sides of the nose, + along the jawline.

Next, apply the highlighter to the high points of your face, including the cheekbones, brow bone, + down the bridge of the nose.

Blend the bronzer + highlighter seamlessly together for a photo-ready finish that accentuates your features.

Enhancing the Body:

For a sun-kissed glow on your body, mix the All-Over Bronzer with your favourite body moisturiser.

Take a small amount of bronzer powder + blend it with the moisturiser in your palm.

Apply the mixture to areas such as the arms, legs, + décolletage for an instant bronzed effect.

Mica, Rice Powder, Titanium Dioxide, Magnesium Stearate, Zinc Oxide + Iron Oxide CI 77491.

01 – A soft, warm shade of peach which is very versatile, so it can be worn with many different skin tones. Suits a fair to medium skin tone.

02 – A rich plum with a slight mauve undertone which would suit an olive to darker complexion.

03 – A peach nectar glow suitable as a universal shade for all skin tones.

Mica, Zinc Stearate, Rice Powder, Zinc Oxide, Boron Nitride, Ethyl Macadamiate, Octyldodecol Stearoyl Stearate, Australian Jojoba Esters, Tocopherol (Natural Vitamin E) + Lauroyl Lysine.[+/- May Contain: Iron Oxide CI (77491), CI (77492), CI (77499) + Titanium Dioxide (CI 77891)

*May contain traces of nut*

Prepare your skin: Start with a clean + moisturised face. Ensure that your skincare products, such as serums + moisturisers, are fully absorbed before applying any makeup.

Choose your application tool: The Saint Minerals® Loose Blush can be applied with your Saint Minerals® Contour Brush, that will provide the desired effect.

Tap off excess product: Gently tap your Saint Minerals® Contour Brush to shake off any excess blush powder to ensure a more controlled + even application.

Apply to the cheeks: Smile to identify the apples of your cheeks. Using light strokes or circular motions, apply the Saint Minerals® Loose Blush onto the apples of your cheeks. Start with a small amount + build up the colour gradually until you achieve your desired intensity.

Blend the colour: Use soft, sweeping motions to blend the blush outward towards your temples + along your cheekbones. This ensures a seamless + natural-looking finish. Make sure to blend well to avoid any harsh lines or patches.

Adjust the colour: If you feel that the blush is too intense, you can use a clean brush to gently blend + diffuse the colour further. This will help to soften the look + create a more subtle effect.

Check for symmetry: Take a step back + examine your cheeks to ensure that the blush is evenly applied on both sides. Make any necessary adjustments to balance the colour if needed.

Set your makeup: Once you are satisfied with the placement + intensity of the blush, continue with the rest of your makeup routine, such as applying foundation, concealer, + setting powder. This will help to lock in the blush + ensure longevity.

Enjoy a fresh cheek look: With the Saint Minerals® Loose Blush applied, you can confidently flaunt a fresh + radiant cheek look. The soft pink, rose glow will enhance your complexion + add a touch of natural beauty to your overall makeup.

Mica (CI 77019), Kaolin Clay, Zinc Oxide, Silica + Magnesium Stearate.

May Contain +/- Red Iron Oxide (CI 77491), Yellow Iron Oxide (CI 77492), Ultramarines (CI 77007) + Tin Oxide

01 – A medium-toned pink. It’s a medium, subtly cool-toned pink.

02 – A cool-toned, pink for all skin types.

03 – Latte is a warm creamy caramel beige.

Hydrogenated Polyisobutene, Polybutene, Polyisobutene, Caprylic/Capric Triglyceride, Ethylene/Propylene/Styrene Copolymer, Simmondsia Chinensis (Jojoba) Seed Oil, Butylene/Ethylene/Styrene Copolymer, Pentaerythrityl Tetra-di-t-butyl Hydroxyhydrocinnamate, Hexylene Glycol, Tocopherol Acetate (Vitamin E), Caprylyl Glycol + Phenoxyethanol. May contain [+/- Iron Oxide (CI 77491), Iron Oxide (CI 77492), Iron Oxide (CI 77499), Titanium Dioxide (CI 77891), Ricinus Communis Seed Oil, Mica, Yellow 5 Lake (CI 19140), Red 7 Lake (CI 15850), Manganese Violet (CI 77742), Red 22 Lake (CI 45380), Red 30 Lake (CI 73360), Red 33 Lake (CI 17200), Red 28 Lake (CI 45410), Blue 1 Lake (CI 42090), Yellow 6 Lake (CI 15985), Red 6 (CI 15850), Tin Oxide + Fragrance.